Winterizing your 2 stroke outboard motor is important. It keeps it safe and makes it last longer. We know How to Winterize a 2 Stroke Outboard Motor
Credit: www.boats.net
Why Winterize Your Motor?
When boats sit during cold months, bad things can happen. We want to stop that. Water may freeze. Lines may clog. Do this to keep your motor happy.
Tools You Will Need
- Fuel stabilizer
- Fogging oil
- Gear oil and pump
- Grease gun and marine grease
- Spark plug wrench
- Garden hose or motor flusher
- Screwdrivers and pliers
- Bucket for old oil
Preparation for Winterizing
Before you start, read your motor’s manual. It has special tips for your motor’s needs.
Steps to Winterize Your 2 Stroke Outboard Motor
- Add Fuel Stabilizer: Put stabilizer in your fuel tank. Then, run the motor for 10 minutes. This helps the stabilizer to mix well.
- Disconnect Fuel Line: While the engine is running, pull off the fuel line. Let the motor use all its gas and stop on its own.
- Fog the Engine: Remove the air cover. Spray fogging oil into the air intake while the engine is off. This keeps the insides oily and safe.
- Drain Gear Oil: Find the gear oil screws. Unscrew the bottom one, then the top one. Let the oil drain in the bucket.
- Refill Gear Oil: Use the pump to put new oil in. Fill it from the bottom hole. Stop when oil comes out the top hole.
- Lube Moving Parts: Use grease on all the bits that move. Check the manual to see where.
- Fresh Water Flush: Hook your hose or motor flusher to the motor. Run fresh water through it for a few minutes.
- Remove Spark Plugs: Take out the spark plugs with the wrench. Spray fogging oil in the holes. Then, put the plugs back in but not too tight.
- Clean the Motor: Take a cloth and clean all parts of the motor. Take off any salt or dirt.
- Store Battery Safely: Take out the battery. Keep it somewhere cool and dry. Charge it sometimes when you remember.
- Cover Your Motor: Put a cover on the motor or store it in a safe place for the winter.
What Not To Do
There are some big no-no’s when winterizing your motor. Let’s check them out:
- Don’t skip the stabilizer. Old gas is bad for motors.
- Not using fogging oil can lead to rust. That’s not good.
- Leaving old gear oil in can hurt your motor next season.
- Forgetting to cover the motor exposes it to dust and moisture.
Credit: www.linkedin.com
End of Season Checklist
Let’s do one last check:
| Checklist Item | Done? |
|---|---|
| Fuel stabilizer added and engine run | |
| Motor fogged properly | |
| Gear oil drained and refilled | |
| Moving parts lubricated | |
| Battery stored correctly | |
| Motor cleaned and covered |
Ready For Spring
By winterizing, your motor is ready for spring. It will start easily and run smoothly. You’ll be happy on your first boat ride!
Frequently Asked Questions On How To Winterize A 2 Stroke Outboard Motor
What Is Winterizing A Outboard Motor?
Winterizing an outboard motor involves preparing your engine for extended downtime during colder months to prevent damage and maintain performance.
Why Winterize A 2 Stroke Outboard?
Winterizing prevents corrosion, fuel degradation, and other cold weather-induced damage, ensuring your 2 stroke outboard motor remains reliable.
Steps To Winterize My 2 Stroke Outboard?
Begin by flushing the engine, stabilizing the fuel, fogging the cylinders, lubricating moving parts, and storing the battery properly.
Can I Winterize A Motor At Home?
Absolutely, with the right tools and instructions, winterizing your 2 stroke outboard motor at home is both achievable and cost-effective.